Welding Rod & Kawat & Tali

Zigong mrodhuksi bahan welding beda kanggo hardfacing, kalebu rod welding tubular, kabel welding, tali fleksibel, lan rod komposit sintered.

Tubular Welding Rod

Cast tungsten carbide, wêdakakêna tungsten karbida macrocrystalline, wêdakakêna karbida tungsten spherical, grit karbida lan pelet karbida semen digunakake minangka fase keras.

Dhiameter 3.2mm ~ 6.0mm

Dawane: 600mm ~ 900mm

Aplikasi: Feed grinder palu, blades saka bit awak baja

→ Cast Tungsten Carbide Tubular Welding Rod

→ Cemented Carbide Pellet Tubular Welding Rod

FeCrMo Alloyed Wear Resistance Flux Cored Wire

Logam sing disimpen minangka paduan kromium sing dhuwur kanthi kateguhan, tahan retak, tahan peeling, tahan panas sing dhuwur, lan resistensi nyandhang dhuwur sawise hardening kerja. Bahan kasebut gampang dipoles lan ora bisa diproses.

Aplikasi: digunakake kanggo ndandani lan remanufacture crusher gulungan, tangan perkusi, palu, Pick, baling-baling, penggemar impellers, piring layar, liners, etc.

→ FeCrMo Alloyed Wear-Resistance Flux-Cored Wire

Rod Komposit

Sisipan karbida sing disemen lan grits karbida sing ditumbuk digunakake kanggo ngasilake rod komposit kanggo alat panggilingan lan mancing. Bubuk tungsten karbida kanthi basis Nikel disinter kanggo aplikasi non-magnetik. Kita bisa nggawe macem-macem rod komposit kanggo kabutuhan unik sampeyan.

→ Batang Komposit Karbida Semen

Tali Fleksibel

Tali kasebut digawe saka wêdakakêna tungsten karbida kanthi paduan basis nikel kanthi kemampuan las lan tahan nyandhang.

Dhiameter 4.0mm, 6.0mm, lan 8.0mm kasedhiya

15 Kg / kumparan

→ Tali Las Fleksibel